Listening to FM Radio Setting up the Antenna, Tuning and Playing the Radio Setting FM Radio Frequency/Range to use iP49 in Other Countries Using the Aux Line-In Jack with other Audio Devices, Sleep Timer, Using the Remote auto/on switch A Consumer Guide to Product Safety Troubleshooting •�...
3G Use this insert Insert 15 iPhone 3G/3GS For this iPhone/iPod NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free at 1-877-446-6301 to purchase one. 4: Time preset iPhone iPod...
Preset / iPhone / iPod / Radio / AUX / Wake-to / Sleep indicators Controls and Indicators Dock Snooze Button Reverse Button Alarm Button Mono/Stereo radio mode DC Jack Remote auto/on Switch iP49 Display Time Display preset iPhone iPod radio wake-to BonGiovi DPS (B) Button Time sync/set Button...
Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into a working outlet. While connected to AC power, the iP49 will charge your docked iPhone or iPod as well as the internal lithium ion battery until fully charged.
When the indicator is low and flashing, you will need to connect the iP49 to AC power to recharge the battery. When the indicator is full and steady (not flashing), the battery is fully charged.
Setting the Time and Calendar using iPhone/iPod Time Sync Time sync mode allows you to sync the iP49 to the time and calendar from your iPhone or recent models of iPod like iPod Touch, iPod Nano and iPod Classic (older models such as iPod Mini do not support this feature).
When the alarm is sounding, press the time. Sure Alarm The iP49 has a sure alarm feature. If you have installed the backup battery, the buzzer alarm will still sound in the event of power failure or if the internal battery is completely discharged. Snooze/Dimmer The iP49 has a programmable snooze.
1. Select and place the insert for your iPhone or iPod model. Gently insert an already playing iPhone or iPod. The iP49 will automatically turn on and you will hear the music playing from your iPod/iPhone. Note: If the playing song/music loudness is too low on the iPod itself, the iP49 may not detect that the iPod/iPhone is in play mode.
3. To turn off the unit, press the The iP49 has a remote auto/on switch located on the back of the unit. Slide the switch to the AUTO position to save battery power when traveling or operating on the internal battery. AUTO disables remote operation when operating on the internal battery.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use.
Please make sure your iPod/iPhone is working properly before dock into the unit. Please refer to your iPod manual for detail. iP49 doesn’t support 3 Remove your iPod/iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod/iPhone. Then reseat it in the dock.
Page 13
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original purchase.
Need help?
Do you have a question about the IP49 and is the answer not in the manual?
Questions and answers