Table of Contents
Advertisement
Setup -
Transfer Setup
1
Transfer Mode
Image Transfer method is selected from FTP and
E-Mail (SMTP).
To use image transfer, FTP and SMTP in the next sections must
be configured properly.
2
SD Card Record
If it is set to On, the image is saved into the SD card as well.
It will setup OFF automatically when SD card doesn't applied.
The SD card setting can be configured on the SD CARD section.
3
Pre/Post Alarm Image
Image Transfer due to event is configured by setting Image
transfer rate and Pre/Post alarm duration.
Number
Define Number of image transferred per second.
of Image
Pre-alarm
Define duration of image transfer before an event.
Duration
Post-alarm
Define duration of image transfer after an event.
Duration
Range of Pre/Post alarm duration can be changed according to
Number of image setting.
Descriptions
4
Click 'Apply' to make above setting effective.
37
1
2
3
4
Advertisement
Table of Contents
