Table of Contents
Advertisement
Network Setup -
DDNS Registration
If you have DYNAMIC IP service from your
Internet Service Provider (ISP), you can't tell
the current IP address of the IP Camera.
To solve this problem, you have to register to
our DDNS service.
At first, you have to check if you are using
dynamic addressing. If so, register your IP
Video Server on our DDNS website before you
configure, setup, or install the IP Camera.
Even though your IP is not dynamic, you will
get benefit if you register to DDNS. In this
case, just remember 'alex.net4c.net/gate1'
instead of complicated series of numbers like
http://201.23.4.76:8078.
For more details, contact our Support Center.
To register IP Camera to DDNS, 'Serial No. ' of the IP Camera should
be known. The 'Serial No. ' can be found in section 6 'Setup - DDNS'
menu.
To use a public DDNS called 'dyndns' or 'no-ip' , refer to the detail
information on how to use the service.
(Visit the web site : http://www.dyndns.com or
http://www.no-ip.com)
15
Advertisement
Table of Contents
