Walk Test; All Zones; Selected Zones - ADT Galaxy 8 User Manual

Galaxy 8/18/60/500/512
Printer off-line
Escape to abort
PIN + ent
0 = OMIT ZONES
[ent] to Select
6

6 = Walk Test

ent to select
ent
1=TEST ALL ZONES

2=SELECTED ZONES

1
WALK TEST ACTIVE
ESC to abort
NO ENTRIES
2
1001 FINAL
#=TEST ENT=START
>A
1002 EXIT
#=TEST ENT=START
#
1002 EXIT
TEST ENT=START
ent
Technical Manuals Online! - http://www.tech-man.com
13
HELP MESSAGE
If a print-out is started without a printer being connected and on-line,
the display indicates that the printer is off-line.
WALK TEST (User Level 5 and above)
PURPOSE
The WALK TEST option provides a method of testing the zones to
ensure that they are operating correctly. There are two options
available:
1. All zones can be tested
2. Selected zones can be tested
In both cases the sounder indicates an open zone. The test is recorded
in the log.
SELECTING WALK TEST
Enter the QUICK MENU. Press the key 6 followed by the ent key.
Once the WALK TEST is selected, TEST ALL ZONES or SE-
LECTED ZONES are displayed.

ALL ZONES

Choosing ALL ZONES (press key 1) starts the test immediately. No
selection is necessary as all valid zones are included in the test. The
sounder operates whenever a zone is opened and stops when all
zones are closed.
NOTE: The TEST ALL ZONES option only tests zones
which can be omitted from the system.
SELECTED ZONES
Choosing the SELECTED ZONES option by pressing key 2 displays
the first zone on the system (zone 1001). Each zone is displayed in
turn by using the >A or <B keys. When the zone to be included in the
test is displayed, press the # key. Other zones can be included in the
test in the same manner. When all of the required zones have been
selected, press the ent key to start the WALK TEST.
NOTE: The SELECTED ZONES option will includes
non-omittable zones.
ENDING WALK TEST
To abort the walk test option press the esc key, otherwise the walk
test option remains active for 20 minutes after the last key press.
User Guide