Table of Contents
Advertisement
4. PTZ control:
How to move PTZ camera?
The process is as follows:
1. Press PTZ button.
2. Select Channel to control.
3. Press Up key to move camera up.
4. Press Down key to move camera down.
5. Press Left key to move camera left.
6. Press Right key to move camera right.
7. At any time press Stop key to stop camera move.
8. Press Auto key to turn the auto pan on.
9. Press PTZ key to quit PTZ control mode.
PC PLAYER SOFTWARE OPERATION
Install the 10-8 Player software by installing the CD supplied with your
system. Is the CD is not available, you may download it from the 10-8
video web site by entering the following address in your browser:
http://www.10-8video.com/dvr/dvr.exe
This will download the player to your computer. When asked, select 'run'
and the software will install. Double click on the 10-8 player icon to load
the player.
If a box appears asking for a password, just hit the enter key or clik on
'OK'. You may assign a password later in the program.
27
Advertisement
Table of Contents
