Accessories; Unit And Media Care - Panasonic DMP-BDT320 Operating Instructions Manual

Accessories

Getting started
Check the supplied accessories before using this
unit.
[For[Australia[and[New[Zealand]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
1 AC mains lead
[For]the]Middle]East]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
2 AC mains lead*
1 HDMI Cable
[For[South[East[Asia]
1 Remote control
(N2QAYB000713)
2 Batteries for remote control
2 AC mains lead*
1 HDMI Cable
* See page 13 for more information.
≥ Product numbers provided in these operating instructions
correct as of January 2012. These may be subject to
change.
≥ Do not use AC mains lead with other equipment.
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.

LR6, AA
(Alkaline batteries)
Point it at the remote control signal sensor on this
unit. ( 8)
4
VQT3V87


Unit and media care

∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ This unit's lens
The disc drive of this unit has sufficient dust
resistance, so there is no need to clean the lens.
∫ Clean discs
DO DO NOT
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal
or transfer, then follow the procedure to return all
the settings to the factory presets to delete the
user settings. ( 36, "To return all settings to the
factory preset.")
≥ The operation history may be recorded in the
memory of this unit.