Playback - Panasonic DMP-BDT320 Operating Instructions Manual

Playback

1
Insert the media.
Playback starts depending on the media.
2
Select the item to play.
Repeat this procedure if necessary.
≥ Signal from PAL discs is output as PAL. Signal from NTSC
discs is output as "NTSC" or "PAL60". You can select
"NTSC" or "PAL60" in "NTSC Contents Output" for NTSC
discs. ( 30)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Select [∫] from the KEYS screen when you
have finished playback to protect the unit's motor, your
television screen and so on.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
≥ To save on electricity, the unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused, displaying the menu,
displaying still pictures, etc.).
Operations during playback
1
Repeatedly press [KEYS] to display the
playback control screen.
2
Select a key.
See page 10 for the KEYS screen operation.
Following functions may not work depending on
the media and contents.
Stop
The stopped position is memorized.
Resume play function
Select [1] (PLAY) to restart from this position.
≥ The position is cleared if the disc is ejected or
you select [∫] several times to display "STOP"
on the unit's display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
19
VQT3V87