Bryant Preferred Owner's Manual page 15

Quick Start
4. Press the up or down button, located to the right of the
display, to change the displayed setting. Stop on the
desired setting.
5. When there are arrow indicators next to both the words
heat and cool at the top right of the screen, the heating
and cooling temperatures are also displayed at the
bottom of the screen. You can change either one by
pressing the button underneath the temperature you
want to change, then pressing the up or down button
on the right. Repeat the process for the other temperature
if necessary and press the done button when you are finished.
6. The thermostat will hold these changes for two hours or until
the next programmed cycle begins, as indicated by the words
temporary hold for 2:00 next to the set temperatures. To change
the amount of time the temperature is on hold, press the button
under the hold hours or minutes. Then press the up or down
button on the right. Stop at the desired amount of hold time.
7. Close the door.
13