Customer Service (763.577.9700) if you 2. To prevent fire or shock hazard, do not have any questions about installing or expose your Reference 150 to rain or replacing vacuum tubes in this unit. moisture. 3. This unit contains voltages which can DO NOT ATTEMPT TO OPERATE THIS cause serious injury or death.
Preparation for Use only on a smooth, hard surface. For upright stability, never operate the unit Your Reference 150 amplifier is shipped while it is sitting on a soft surface such as with the vacuum tubes packed in foam a thick rug or carpet.
Using high-quality other equipment. Only use the power speaker cables, securely fasten the (-) switch on the front of the Reference 150 speaker lead to the appropriate (-) for On/Off control of the amplifier, or the terminal, then the (+) lead to the...
The front power rocker switch will not power cords: they must be at least 12- turn the Reference 150 off if the remote gauge and have a standard grounding system is on. plug properly installed.
‘enriched’ Class AB1, top cover before resuming operation. and will satisfy the most critical listener. Do not operate the Reference 150 with For best results, operate and adjust the fans disconnected or if one or both fans Reference150 at 120VAC. Adjustment should stop running.
Research Customer Service Department. Outside the United States, the authorized importing retailer distributor accepted the responsibility for warranty of Audio Research products sold by them. The specific terms and remedies for Disposal and Recycling fulfillment of the Limited Warranty may Guidelines vary from country to country.
Need help?
Do you have a question about the Reference 150 and is the answer not in the manual?
Questions and answers