Windshield Wipers; Windshield Washer - Chevrolet 2009 TrailBlazer Owner's Manual

Windshield Wipers

8 (Mist): Turn the band to mist, for a single wiping
cycle. Hold it there until the wipers start, then release it.
The wipers will stop after one wipe. Hold the band on
mist longer if more wipe cycles are needed.
9
(Off): Turns the wipers off.
N (Windshield Wipers): Turn the band to control the
windshield wipers.
6
: Turn the band to set the wiper speed for a long or
short delay between wipes. The closer to the top of the
lever, the shorter the delay time.
For steady wiping at low speed, turn the band away
from you to the first solid band past the delay settings.
For high-speed wiping, turn the band further, to the
second solid band past the delay settings.
Be sure to clear ice and snow from the wiper blades
before using them. If they are frozen to the windshield,
gently loosen or thaw them. If they become worn or
damaged, get new blades or blade inserts.

Windshield Washer

L (Windshield Washer): Press the windshield
washer paddle to spray washer fluid on the windshield.
The wipers will clear the window and then either
stop or return to the preset speed.
CAUTION:
{
In freezing weather, do not use your washer until
the windshield is warmed. Otherwise the washer
fluid can form ice on the windshield, blocking your
vision.
3-9