14 Others
Play external audio/video
input
You can connect an external audio/video player
to this system.
1
Connect a composite AV cable to
•
the AV-IN socket on the front panel,
and
•
the audio and video output sockets of
the external player.
2
Tap
>
to access the full menu with all
feature icons displayed.
3
[AV-IN1] to display the playback
Tap
interface.
4
Operate on the external player to start
play (see the user manual of the external
device).
Tip
•
If you connect this system to an external player through
the VIDEO IN, AV-IN L, and AV-IN R sockets on
the rear panel, tap
[AV-IN2] to switch the source
[AV-IN1].
instead of
36
EN
Use rear monitors
If one or two monitors are connected for
backseat passengers, you can select different
sources for front and backseat passengers.
Note
•
Make sure that rear monitors are correctly connected
to this system.
•
Only when the multi-zone display mode is activated,
rear monitors can receive signals from the system.
•
By default, the same signals are transferred to the front
and rear monitors.
•
When a disc, USB storage device, SD/SDHC card, or
iPod/iPhone connected through the USB socket is
selected as the source for front zone, you cannot select
another source for rear zone.
•
Only when the system is in radio mode, navigation
mode, or Bluetooth mode, you can select a source
for rear zone from disc, SD/SDHC card, USB storage
device, or iPod/iPhone connected through the USB
socket.
1
Tap
>
to access the full menu with all
feature icons displayed.
2
Tap
.
R
» The [Rear Zone] menu is displayed.
3
Tap [Mode] to enable or disable the signal
transferring to rear monitors.
[On]: Enable the signal transferring to
•
rear monitors.
[Off]: Disable the signal transferring to
•
rear monitors.
» When it is enabled, the following
interface is displayed.