Introduction Installing the Batteries Thank you for your purchase of the Targus Soft-Touch Cordless Laser 1. Remove the battery cover from the top of the mouse by using the notch Mouse. The micro USB receiver is small enough to leave plugged into on the back.
Page 3
Targus Soft-Touch Cordless Laser Mouse Targus Soft-Touch Cordless Laser Mouse 3. Remove the micro USB receiver stored inside the center compartment . 5. Replace the battery safety clip by sliding it forward until it clicks into place and then replace the battery cover.
Targus Soft-Touch Cordless Laser Mouse Targus Soft-Touch Cordless Laser Mouse Establishing the Connection Power On: Press and hold the power button for 3 seconds and then release. (A) Plug the USB receiver into an available USB port on your computer.
Targus Soft-Touch Cordless Laser Mouse Targus Soft-Touch Cordless Laser Mouse Programming Your Mouse Product Specification Transmitter Visit www.targus.com to download and install the driver. 2.402GHz-2.482GHz Once installation is complete, open the driver software and select the Battery Type Alkaline battery AA desired setting for the scroll-wheel button.
Targus warrants this product to be free from defects in materials and workmanship Changes or modifications not authorized by the party responsible for compliance for one year. If your Targus accessory is found to be defective within that time, we will could void the user’s authority to operate this product.
Page 7
Targus Soft-Touch Cordless Laser Mouse Targus Soft-Touch Cordless Laser Mouse CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS I LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES.
Need help?
Do you have a question about the Soft-Touch and is the answer not in the manual?
Questions and answers