Led Indicator - Kenwood PKT-23 Instruction Manual

LED indicator

Refer to the "LED INDICATOR
STATUS" table on page 10.
PF-2 key
Press this key to toggle the
function of the Up/Down keys
between Volume Adjustment
mode and Channel Select
mode. Hold this key for 1 second
to activate its programmable
function. The default setting is
[Monitor].
• For function descriptions and
details on how to change the
key functions, refer to "KEY
ASSIGNMENT MODE" on page
18.
Up/Down keys
Press these keys to adjust the
volume and change the channel.
Press the PF-2 key to toggle the
•
function of the Up/Down keys
between Volume Adjustment
mode and Channel Select mode.
• To change the operating
frequency or QT/DQT settings of
a channel, refer to "CHANNEL
SETUP MODE" on page 12.
Strap hole
Connect a commercially available
strap here.
• When using the belt clip, the
strap hole will be covered and
cannot be used. Instead, use the
strap hole of the belt clip.
8
Antenna
⑥
⑦
⑧
Microphone
Speaker
⑨