Setting Up A Wi-Fi Connection - Panasonic HC-V550 Operating Instructions Manual

Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]

Setting Up a Wi-Fi Connection

To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ When this unit is turned on, the Wi-Fi setting confirmation screen may be displayed. Touch
[YES], and set up Wi-Fi setting.
≥ To set up the Wi-Fi setting of this unit using the smartphone application "Image App", touch
[YES] again. (Refer to "Using the Network Easy Setup to set up a connection" on page 158.)
≥ To set up Wi-Fi using this unit, touch [NO]. (Refer to "Connecting to a wireless access point"
on page 159.)
≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
Wi-Fi connection
methods
Available Wi-Fi
functions
≥ If you select [History], you can set up a Wi-Fi connection that uses the connection settings of a
previously used Wi-Fi function.
∫ About the status indicator and the connection status icon when
connected to Wi-Fi

Connecting to a wireless access
point (l 159)
≥ [Remote Ctrl] (l 132)
≥ [Baby Monitor] (l
≥ [Hom.Monitor] (l
≥ [DLNA Play] (l 144)
≥ [Copy] (l 146)
≥ [Live Cast] (l 150)
(l 165)
A Lit green
≥ The status indicator is lit green while this unit is

connected to a destination device after completing a
Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit
red again.
B The connection status icon
When connected to wireless access point:
≥ The display will change as follows according to the
radio wave intensity:
When directly connected:
Setting up a direct connection to a
smartphone
≥ [Remote Ctrl]
135)
138)
connected to Wi-Fi/
(Strong).
connected to Wi-Fi/
- 157 -
(l 163)
(l 131)
not connected to Wi-Fi
(Weak) # #
not connected to Wi-Fi
#