Broadcasting Live - Panasonic HC-V550 Operating Instructions Manual

Broadcasting live

Press Wi-Fi button and touch [Live Cast].
≥ If a "LUMIX CLUB" Login ID and Password has not been registered to this unit yet, enter them
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To send e-mails
You can send e-mails containing such information as the USTREAM channel name or the
scheduled broadcast date.
≥ This unit can only set the scheduled broadcast date.
"LUMIX CLUB".
≥ On the "LUMIX CLUB", register the destination addresses of the e-mail in advance.
Touch .
/ / will disappear when no touch function is
≥
performed for a specific period of time. To display them again,
touch the screen.
∫ To start the live broadcast
Touch .
/ / will disappear when no touch function is
≥
performed for a specific period of time. To display them again,
touch the screen.
∫ To stop the live broadcast
Touch .
≥ When (grey) is displayed, unsent data is present. Wait until the unsent data is sent and
displayed.
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.
(l 154) For other settings, set them on the
- 152 -
A [EXIT]
A [EXIT]


is