Free Memory - Nokia N96 User Manual

availability icon is not shown in the standby mode.
However, you can still manually scan for available
WLAN networks and connect to WLAN networks as
usual.
If you have set Packet data connection
●
available in connection settings, and there is no
packet data coverage (GPRS), the device periodically
tries to establish a packet data connection. To
prolong the operating time of your device, select
Packet data connection
The Maps application downloads new map
●
information when you scroll to new areas on the
map, which increases the demand on battery
power. You can prevent the automatic download of
new maps. See "Maps", p. 91.
If the signal strength of the cellular network varies
●
much in your area, your device must scan for the
available network repeatedly. This increases the
demand on battery power.
If the network mode is set to dual mode in the
network settings, the device searches for the UMTS
network. To only use the GSM network, press
and select Tools
>
Network Network mode
>
The backlight of the display increases the demand
●
on battery power. In the display settings, you can
change the time-out after which the backlight is
© 2008 Nokia. All rights reserved.
to
When needed.
>
Settings Phone
> >
> GSM.
switched off, and adjust the brightness of the
display. Press
General
>
time-out
When Leaving applications running in the background
●
increases the demand on battery power. To close
the applications you do not use, press and hold
, scroll to an application in the list, and press C.
Pressing C does not close Music player. To close
Music player, select it from the list and
Exit.
To turn on the power save mode, press the power
●
key, and select
the power save mode, press the power key, and
select Deactivate power
able to change the settings of certain applications
when the power save mode is turned on.

Free memory

Many features of the device use memory to store data.
,
The device notifies you if the device memory, mass
memory, or the memory card memory (if available) is
low.
To view how much memory different data types
consume, press
, and select Tools
Personalisation Display
>
or Brightness.
Activate power saving. To turn off
saving. You may not be
, and select Tools
Settings
> >
and Light
Options
>
File mgr., the
>
23