Installing Hardware; Inserting The Battery - Silvercrest NM1005 User Manual And Service Information

Notebook Mini-Mouse SilverCrest NM 1005

Installing Hardware

Inserting the Battery

Open the battery compartment cover on the lower side of the
mouse and insert the included AA battery in the battery
compartment with the proper poles (refer to the figure below).
10 Optical sensor
11 Battery compartment
12 Eject button for the radio USB receiver
13 Inserted radio USB receiver
The battery is used up when the control lamp (4) on the upper side
of the radio mouse flashes red. Then replace it with a new AA
battery, 1.5 V (Mignon).
Note: The pole direction of the battery to be inserted is sketched in
the battery compartment.
English - 9