Dome Protocol Setup; Rs485 Setup - Visus MPEG-4 DVR User Manual

User's Manual
4.6.2

Dome Protocol Setup

The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the MPEG-4 DVR. From the Main menu,
select <Camera Setup> and press ENTER. The following menu is displayed.
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
The available protocol includes <DynaColor>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2> and <None> (default).
4.6.3

RS485 Setup

MPEG-4 DVR controls the domes via RS-485 communication protocol. The
RS-485 parameters in MPEG-4 DVR must be set to the same parameters as
the protocol for RS-422 setup of the dome.
Users are allowed to change the RS-485 settings of the MPEG-4 DVR.
Select <System Setup> in Main menu, then select <RS485 Setup> from the
System Setup menu and press ENTER. The following menu is displayed.
1 Unit ID
2 Baud Rate
3 Bits
4 Stop
5 Parity
Camera Setup
NOTE: The settings become effective after saving the changes and
exiting from the menu.
RS485 Setup
32
CH1
None
0
NO
NO
0
0
0
0
224
9600
8
1
None