Power Up / Down The Unit - Visus MPEG-4 DVR User Manual

3.2

Power Up / Down the Unit

If you must shut down the MPEG-4 DVR for any reason, please use the
proper shut down and power up procedures to avoid damaging your DVR unit.
To Power Up the Unit
Check the used type of power source before plug in your DVR first (the unit
accepts the power input between AC100V to AC240V)
The color bar and system checking information will be shown on the monitor
and disappear when the unit has been completely powered up.
To Restart / Shutdown the Unit
Press MENU and input the administrator password to access the OSD Main
menu. Select <Shutdown> in Main Menu and press ENTER to enter the
Shutdown menu, which displays as follows.
1. Power Off
2. Reboot
<Power Off>
Select this item to shut down the unit. Do not remove the power during shut
down until the message "You can safely turn off DVR now!" displays.
<Reboot>
Select this item to reboot the unit. The color bar and system checking
information are displayed on the monitor until the unit is completely restarted.
Shutdown
17
User's Manual
Execute
Execute