Table of Contents
Advertisement
User's Manual
4.4.3
To Export event video
To export event video, follow these steps:
• Press SEARCH and play wanted event video. To play event video, refer to
Section 4.3 Searching Recorded Video.
• After entering the playback mode, press COPY. The "ezBurn" window
displays as below figure. The information shown on it is for read only.
205/11/07
• If there is no any exportable external device connected to the DVR unit, a
warning message will be shown on the screen
• Press ENTER to start the export the whole event video to the connected
device; or, press ESC to abort.
4.5
Deleting Recorded Video
User can delete the Normal and Event recorded video in Purge Data menu.
The administrator password is required to access the function. Select
<Record Setup> from Main menu, and then in Record Setup menu, move the
cursor to <Purge Data> and press ENTER; the Purge Data menu is
displayed.
1. Purge All Data
2. Purge All Event Data
3. Purge Event Before
4. Start to Purge
The first four items are used to select the data that should be purged. The
items are described as follows. After select the data you want to purge, set
the fifth item <Start to Purge> to <YES> and press ENTER to start the
deleting process.
Purge All Data
Select the item to delete all recorded video from database.
ezBurn confirmation
Selected Device: Built-in-CD-RW
All data on the disc will be erased.
Exported Required Size = 11 MB
Export Event Info:
Data
Time
AM10:42:35
Enter: YES
Ch
13
ESC: NO
Purge Data
30
Type
Motion
NO
NO
2000/01/01
NO
Advertisement
Table of Contents
