Emergency Calls; Certification Information - Nokia 6235 User Manual

■ Emergency calls

Important: Wireless phones,
including this device, operate
using radio signals, wireless
networks, landline networks,
and user-programmed
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on any
wireless device for essential
communications like medical
emergencies.
To make an emergency call, make sure
your device is properly charged before
attempting any emergency calls. If your
battery becomes empty, you cannot
receive or make calls, including
emergency calls and must wait a few
minutes after the charging begins to
place your call.
1. If the device is not on, switch it on.
Check for adequate signal strength.
Some networks may require that a
valid UIM card is properly inserted in
the device.
2. Press the end key as many times as
needed to clear the display and ready
the device for calls.
3. Key in the official emergency number
for your present location and press
the call key. Emergency numbers vary
by location.
If certain features are in use, you may
first need to turn those features off
before you can make an emergency call.
If the device is in an offline or flight
mode you must change the profile to
activate the device function before you
R e f e r e n c e i n f o r m a t i o n
can make an emergency call. Consult this
guide or your service provider. When
making an emergency call, give all the
necessary information as accurately as
possible. Your wireless device may be the
only means of communication at the
scene of an accident. Do not end the call
until given permission to do so.

■ Certification Information

(SAR)
THIS MODEL PHONE MEETS
INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter
and receiver. It is designed and
manufactured not to exceed the limits for
exposure to radio frequency (RF)
recommended by international guidelines
(ICNIRP). These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the
general population. The guidelines were
developed by independent scientific
organizations through periodic and
thorough evaluation of scientific studies.
The guidelines include a substantial safety
margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The
SAR limit stated in the international
guidelines is 2.0 W/kg.* Tests for SAR are
conducted using standard operating
positions with the phone transmitting at
its highest certified power level in all
tested frequency bands. Although the
SAR is determined at the highest
85