Send A Business Card; Receive A Business Card; Voice Commands; Handsfree Operation With Voice Commands - Nokia 6235 User Manual

S e t t i n g s
(business card) as a text message to a
compatible phone or other handheld
device using the infrared port. See
"Infrared" on page 61.

Send a business card

1. In the standby mode, select
Menu > Settings
2. Highlight the entry from the
contacts list that you wish to
send.
3. Select Details
bus. card > Via infrared
number to send primary number
only or All details
contact information for the
contact.
4. Align the IR port to the other
activated device IR port. Select
OK and your device will start
sending the business card with
IR.

Receive a business card

1. In the standby mode, select
Menu > Settings
Select. Infrared reception
activated displays.
2. Align the IR port with the
activated device port that is
sending the business card.
3. Select Show >
business card in phone book
54
> Infrared.
> Options > Send
> Default
to send all
> Infrared >
Save to save the
memory, or select
discard the business card.

■ Voice commands

You can dial up to 25 stored numbers
using voice command dialling. See
"Voice tags" on page 35.
Before using voice tags, note that:
• Voice tags are not
language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
• Very short names are not
accepted. Use long names and
avoid similar names for different
numbers.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should not
rely upon voice dialling in all
circumstances.
Handsfree operation with
voice commands
You can set as many as five voice
commands, which allow handsfree
operation of certain features in your
device.
Exit > OK to