Trip Computer - BMW 525i Owner's Manual

To reset average fuel consumption: press BC
button on turn signal lever for approx. 2 sec-
onds.
Displays on Control Display
You can also call up the computer via the iDrive.
For principle details, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
On vehicles without navigation system
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system , refer to page 125.
> Cruising range
74
Online Edition for Part-Nr. 01 41 0 159 736 - © 08/05 BMW AG
> Distance to destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system
> Average speed
> Average fuel consumption
Resetting values
You can reset the values for the average speed
and average fuel consumption:
*
:
1. Select the respective menu item and press
the controller.
2. To confirm your selection, press the con-
troller again.
Entering a distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance to
your destination. If needed, hold it against a
slight resistance to enter a larger difference.
3. Press the controller to apply the setting.
The distance is automatically preset during the
destination guidance of the navigation sys-
*
tem .

Trip computer*

The trip computer is suitable, for example, for a
vacation trip.
1. Open the start menu.
2. Open "Navigation".
On vehicles without navigation system
Open "Car Data".
, refer to page 125.
*
: