Voice Commands - BMW 525i Owner's Manual

1. Establish connection.
2. Press the controller.
3. Select "Keypad" and press the controller.
4. Select the desired character and press the
controller.
Each character is sent immediately and
confirmed by a tone depending the mobile
phone model.
Changing between mobile
phone and hands-free system
From mobile phone to handsfree
system
You can continue calls begun outside the Blue-
tooth range of the vehicle via the handsfree sys-
tem when the motor is running or the ignition is
switched on. Depending on your mobile phone,
the system automatically switches over to the
handsfree mode.
For mobile phones that do not automatically
switch over to the handsfree mode:
> Depending on the mobile phone model
used, the conversation can also be contin-
ued via the handsfree system if necessary.
174
Online Edition for Part-Nr. 01 41 0 159 736 - © 08/05 BMW AG
Act according to what is shown on the
mobile phone display, refer to the operating
instructions of your mobile phone.
> Press the button above the storage
compartment. Switching over may take
several seconds.
From handsfree system to mobile
phone
When you telephone via the handsfree system,
you can also continue the call via the mobile
phone if necessary, depending on the mobile
phone model. Act according to what is shown
on the mobile phone display, refer to the oper-
ating instructions of your mobile phone.
Operation by voice*
The concept
You can operate your mobile phone without
having to remove your hands from the steering
wheel. When making your entries, you will be
supported by announcements and questions in
many cases.
The same prerequisites as for operation via
iDrive apply, refer to page 170.
Symbols in Owner's Manual
{...} Say the specified commands word for
word.
{{...}} Indicates responses of the system.

Voice commands

Activating system
1. Press the button on the steering wheel.
An acoustic signal indicates that you can
say commands.
2. Say the command.
The text or numbers that the voice com-
mand system has registered will appear on
the Control Display.