Setup - Ovislink WL-8000AP User Manual

SETUP

Note: Before your starting hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for the Access Point is at the
center of your wireless network, with line of straight to all your wireless stations. Also,
remember to adjust the antenna; usually the antenna is placed higher, the performance
will be better.
1. Connect to your local area network:
Connect an Ethernet cable to the Ethernet port of this Wireless Access Point, and the
other end to a hub, switch, router, or another wireless access point.
2. Power on the device:
Connect the included AC power adapter to the Wireless Access Point's power port
and the other end to a wall outlet.
Check the LEDs:
The Power, Wireless Link/Act. and LAN should be ON. Wireless Link/Act. and LAN
will blink if the data is being transmitted or received.
3. Configure your PC:
Make sure your local PC(s) has wireless network adapter installed.
6