Table of Contents
Advertisement
Fragment Threshold
Output Power Level
b/g Mode
Hidden SSID Support
TI Turbo Mode
Interference Avoidance Click "Enabled or "Disabled to enable or disable the Access
TI Video Blast Support
Save
Defaults
Cancel
data flow, only minor modifications of this value are
recommended.
Fragmentation mechanism is used for improving the
efficiency when high traffic flows along in the wireless
network. The value can be set from 256 to 4096. The default
value is 4096.
You can choose the percentage of maximum power to meet
your requirement. The default is Full.
You can choose one mode of the following you need.
"Mixed: 802.11b supported rate and 802.11g supported rate.
" b only: 802.11b supported rate only.
" b+: 802.11b supported rate and 22 Mbps PBCC rate.
"11g only: 802.11g supported rate only.
The default is Mixed mode.
Click "Enabled or "Disabled to hide or broadcast the SSID.
Click "Enabled or "Disabled to enable or disable enhancing
throughput rate.
Point's energy detection mechanism.
"Enabled/ "Disabled: enable or disable the vHCF feature.
Destination IP Address: The destination IP address with
preferred bandwidth.
Protocol: The destination AP's protocol.
Port Number: The destination AP's port number.
After completing the settings, Click Save to save the settings.
Click to restore the AP to factory default settings.
Click Cancel to discard the data you have entered since last
time you press Save.
10
Hide quick links:
Advertisement
Table of Contents
