Advertisement
12. Attach the hot and cold water supply lines [not supplied].
13. Test the entire system for any leakage by filling the tub with
water, and then draining it. Once no leaks are detected, install
the access panel cover using the screws provided.
CLEANING AND MAINTENANCE
To maintain the smooth, high gloss surface of your bathtub, follow
these tips:
• Use common household cleaners (non-abrasive) or a mild liquid
dish washing detergent. Rinse well and dry with a clean cloth.
• Do not allow your acrylic surface to come into contact with
products such as acetone (nail polish remover), nail polish, dry
cleaning solution, lacquer thinners, gasoline, pine oil, etc.
• Remove dust and dry dirt with a soft, damp cloth.
• Clean grease, oil, paint and ink stains with isopropyl (rubbing
alcohol). Immediately rinse with water after removal of stain.
• Avoid using razor blades or other sharp instruments that might
fall and scratch the surface.
Fig. 4
7
Advertisement
