Advertisement
BEFORE YOU START
1. Inspect your unit before proceeding. Check surface for any
flaws or damage. Once you unpack your unit, check for chips,
scratches, cracks, dents or scuff marks. If any damage is
noticed, do not install.
2. Please read instructions carefully and keep for future reference.
3. Protect the entire surface during installation.
4. Make sure the floor structure is capable of supporting 100 lbs
(45.5 kgs) per square foot.
5. All holes drilled into the unit must be done from the finished
surface side with extreme care and caulked very carefully to
form a watertight barrier.
6. Your installation must comply with all local plumbing codes.
Have a qualified tradesman do and/or approve your plumbing
installation.
WARNING: Always wear safety goggles and gloves in order to avoid
any personal injuries.
3
Advertisement
