Grand IP VIDEO SERVER User Manual page 10

Current user list：It lists all current users.
User Management
Motion Detect
Motion Detect ： Select "Enable" to activate the motion detection. And chose the sensitivity of
motion detect (High / Middle / Low).
Mail Setting
- Setup the "SMTP Maul Server" and E-mail address. (Password use or not)
- Key in the sender's email address and the recipient's email address.
- The content of "Subject" can be modified.
FTP Setting：The motion detected images can also be uploaded to FTP server.
- Key in the IP address or domain name of the FTP Server.
- Key in "Username" and "Password" of the FTP Server.
- Certain FTP severs need an "Account" field. Leave it blank if it is not needed.
- Key in the remote folder upload path information for saving the setting.
16
Motion Detection Setting
Network
IP Assgnment
- Manually：Setting IP address / Subnet mask / Default gateay
- Automatically by DHCP：When IP Video Server is joined into the LAN, it will issue the
DHCP packets to request an IP address that is dynamically assigned by the DHCP server.
- Select "Reboot immediately" to take effect about these setting.
PPPoE
- Save & Dial Now：Press the button to connect to the ADSL line by PPPoE immediately.
- Dial On Power Up：When you select this function, Grand IP Video Server will dial up
PPPoE connection automatically after each power up. If you prefer to use PPPoE
connection, this function is recommended.
- Key in "Username" and "Password" of the PPPoE.
- Send mail after dialed：Mail sent out after dialing is completed.
17