1. Manuals
  2. Brands
  3. Grand Manuals
  4. Server
  5. IP VIDEO SERVER
  6. User manual

Grand IP VIDEO SERVER User Manual

Ip video server 4 port
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
GRAND IP VIDEO SERVER 4 PORT
(
Remote View / Control / Recording / Snapshot through IE
User's Manual
ISSUE：2007/3/13
The information in this document is subject to change without notice.
This document contains materials protected by copyright. All rights are reserved. No
part of this manual may be reproduced or transmitted in any form, by any means or for
purpose without express written consent.
Federal Communications Radio Frequency Interference Statement.
)
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio of television reception, which can be
determined by turning the equipment off or on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
Notice :
(1) The changes or modifications not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
(2) Shielded interface cables and AC power adapter, if any must be used in order to
comply with the emission limits.
CE DECLARATION
This device complies with CE class B.
*EN55024
EN55022
EN61000-3-2
EN61000-3-3
Printed in Taiwan R.O.C.
All contents are subject to change without notice.
All trademarks are the property of their respective owner.
EN61000-4-5
EN61000-4-2
EN61000-4-6
EN61000-4-3
EN61000-4-8
EN61000-4-4
EN61000-4-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP VIDEO SERVER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Grand IP VIDEO SERVER

  • Page 1 This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form, by any means or for GRAND IP VIDEO SERVER 4 PORT purpose without express written consent.

  • Page 2: Table Of Contents

    Internet web site or connect to a Video Camera to watch your home or baby room on internet from anywhere in the world, and you also can email the image to your friends or families. Grand IP Video 4.4 Connect to ADSL………..………………………………..11 Server 4 Port supports motion detection function, and also supports the image quality, image size and …...

  • Page 3: Product Features

    Default：Press this button to .restore the original default parameters. Address is recommended), Dynamic DNS, and firewall port forwarding (used in virtual IP Reboot (reset)：Press this button to restart the Grand IP Video Server. address). 4 Video IN：Connects to video out of video source. (camera、DVD player) 1 Audio IN：Connects to sound output.

  • Page 4: Software Installation And Operation Guide

    The MS-DOS window will appear, please key in ” ipconfig “ and then press “ ENTER “ 4.1 First time to login Grand IP Video Server 4 Port Step 1：Please execute the “ipEdit.exe” in the CD, and select the “Unblock”...

  • Page 5: How To Use The Virtual Ip Address

    If your network Architecture supports the following figure, you will need to do port and local virtual a port 8888 and 8889 for the IP Video Server 4 Port, the following figure is just a example, IP forwarding in the firewall or gateway setup.

  • Page 6: Limitation Of Ftp Protocol

    FTP server (IP Video Server) and FTP client (Remote PC) both are virtual IP addresses. and DSL modem compatibility )” You need to change the Remote PC to be a real IP address, also can change the IP Video Server Internet Options...

  • Page 7: Connect To Adsl

    DSL modem compatibility )” If you want to connect IP Video Server 4 Port with ADSL directly, please use the following steps to dial up PPPoE, but if the IP Address is dynamic, you need to setup DDNS function.

  • Page 8: About Internet Security

    After you update those files to the Player, please remember to delete the Port forwarding After connected to the IP Video Server 4 Port, and the Video Server window will appear. There are “Change Password”, “Camera Control”, ”Channel Select”, “View Log”, “Configuration”...

  • Page 9: Change Password

    Resolution：To select the image resolution. (160x120, - NTP ：Key in the Server IP address, and IP Video Server will get the time from NTP server. - Input new time：Disable the “Synchronize with PC’s time”, you can set up the time by...
  • Page 10 - Manually：Setting IP address / Subnet mask / Default gateay - Automatically by DHCP：When IP Video Server is joined into the LAN, it will issue the - Certain FTP severs need an “Account” field. Leave it blank if it is not needed.

  • Page 11: Delete A Camera

    - If the mail server needs authentication, the “Password” need to be selected. - Key in the sender’s email address and the recipient’s email address. - The content of “Subject” can be modified. - Click the “Save” to save the setting. Dynamic DNS 5.6 Delete A Camera Network Setting...

  • Page 12: Other Functions

    5.7 Other Functions On the IE Browser, right mouse click on the video to active a pop-up menu. The menu includes “View”, “Splits”, “Rotate”, “Resolution” functions of the video, and includes “Image Recording” and “Save Current Picture As” functions. Image Recording 5.7.2 Save Current Picture As Step 1：Click “Save Current Picture As…”...

  • Page 13: Trouble Shooting

    6. Trouble Shooting Situation Check Point 1. Press continuously the default button of the IP Video Forgot the login user Server 4 ports about 10 seconds to restore the factory name and password default settings. Default IP Address: 192.168.1.127 When you need RMA or advanced technical service, please fill in this form as detailed as possible and FAX or Email it to your dealer or service representative.

Table of Contents