Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for KennellDD AMC-S2003
- Page 1 AMC 1080P/1080i HD PTZ Color Video Cameras User Manual V1.0...
- Page 3 SAFETY OF NOTICE-IMPORTANT!!! The following important notes must be followed carefully to run the camera and respective accessories in total safety. The camera and relative accessories are called video system in this section. Before installing the camera, please read this manual carefully. Please follow installation instructions indicated in this manual during installation.
- Page 4 Do not move the camera head manually. In doing so would result in malfunction of the camera. Do not hold the camera head when carrying the video camera. This camera is for indoor use only. It is not designed for outdoor use. ...
-
Page 5: Table Of Contents
CONTENTS SAFETY OF NOTICE-IMPORTANT!!! ------------------------------------------ 3 CONTENTS -------------------------------------------------------------------- 5 ABOUT THE PRODUCT -------------------------------------------------------- 1 -------------------------------------------------------------------------------- 1 EATURES ----------------------------------------------------------- 1 & A ARTS CCESSORIES ---------------------------------------------------------------- 2 & I ARTS NTERFACES ------------------------------------------------------------------ 3 WITCHES ETTINGS -------------------------------------------------------------------- 4 EMOTE ONTROLLER INSTALLATION PREPARATION ----------------------------------------------- 6 ---------------------------------------------------------------- 6 ONNECT OWER... - Page 6 --------------------------------------------------------------------------------- 12 ANCEL ----------------------------------------------------------------------------------- 12 NTER ----------------------------------------------------- 12 IST OF PECIAL RESET OMMANDS INSTALLATION INSTRUCTIONS--------------------------------------------- 13 ---------------------------------------------------------- 13 ESKTOP OUNT NSTALLATION -------------------------------------------------------------- 13 OUNT NSTALLATION ------------------------------------------------------------ 14 EILING OUNT NSTALLATION ---------------------------------------------------------- 15 ENDANT OUNT NSTALLATION MENU SETTINGS ------------------------------------------------------------ 16 ------------------------------------------------------------------- 16 ONFIGURATION ---------------------------------------------------------------------- 20 XPLANATION...
-
Page 7: About The Product
List Of Parts & Accessories ABOUT THE PRODUCT When you open the box, check all accessories according to the packing list. Features Camera (1) 1/2.8 inch Exmor CMOS sensor, 3.27megapixel； Supports full resolution up to1080/60P and SD video formats； ... -
Page 8: Main Parts & Interfaces
Main Parts & Interfaces Bottom View Camera Front View 8 DIP Switch Set camera address, protocol, baud rate, 1 Camera Module video format and mounting type. 2 Power Indicator 9 Mounting Hole 3 Remote Controller Indicator 1/4”inch screw thread for fixing camera. Rear View 10 Locating Hole To define installation direction of camera. -
Page 9: Safety Of Notice-Important
Sw2 settings Dip Switches Settings No 1 and 2 of SW2 is used to set protocol; no Before operating the camera, set the camera 3 and 4 is used to set baud rate; no 5, 6, 7, address, DVI-I output signal format and video 8 is used to set video output format. -
Page 10: Remote Controller
Remote Controller 2 Camera Selection Button Used to switch among 4 cameras, press 1-4 number buttons to control cameras with 1-4 addresses respectively. For example, press button 1 to control the camera with address 3 Focus Press“AUTO”button to switch to Auto Focus, press “MANU”... -
Page 11: Contents
8 Cancel 16 Direction / Menu Operation In None-menu status, press these four To cancel inputted numbers buttons to pan left/right and tilt up/down. 9 Power In Menu status: button to select After the camera has been connected to among menu options, power source, in none-menu status, press change option / value. -
Page 12: Installation Preparation
INSTALLATION PREPARATION Connect Power Source Use remote control to turn on / off camera Connect power adapter supplied together Once camera started successfully, in with the camera to power source, after None-menu status, the Power button powered on, camera’s power indicator can be used to turn on /off the camera. -
Page 13: Cable Connecting Instructions
CABLE CONNECTING INSTRUCTIONS Connect the camera to relative devices with the cables supplied with the camera. DVI-I Interface... -
Page 14: Cable Package
Cable Package HD-SDI Interface Note Power Connection Once the RS-422/RS-485 interface is used as RS485 control, simply connect R+ & T+ as RS485+ and Connect power adapter supplied together with R- & T- as RS485-. the camera to power source. -
Page 15: Remote Controller Operation
Camera Selection REMOTE CONTROLLER OPERATION Before operating the camera, check if power and other devices have been correctly connected. Used to switch among 4 cameras, press 1-4 number buttons to control cameras with 1-4 Power addresses respectively. For example, press button 1 to control the camera with address 1. -
Page 16: Pattern
“ ” button to Auto Focus once every time it is pressed, then switch back to Manual Focus mode. Pattern Used to open / close back light compensation. Zoom Used to activate Pattern Scan1 and Pattern Scan2. Pattern Scan 1: camera pans between±45°of current position. -
Page 17: Back
Menu operation Press MENU button to enter /exit menu. In Menu status: button to select among menu options, to change Back option / value. Press “ ” button to go back to previous menu. In None-menu status: press this button to Direction / Menu Operation switch among pan / tilt control speeds. -
Page 18: Preset Setting
Preset Setting Cancel To cancel inputted numbers “ ” button to call a preset. Input number key(s), and then press this button to call a preset. Enter “ ” button to set a preset. Move the camera to a specific position, adjust focus value and etc, and then press this button to set a preset. -
Page 19: Installation Instructions
Note INSTALLATION Take effective measures to avoid camera from dropping. Do not grab the camera head when carrying. INSTRUCTIONS Do not rotate the camera head with hand. cause malfunction to the camera. The camera has 4 installation types: desktop, ceiling, wall, pendant mount installations. -
Page 20: Ceiling Mount Installation
Fix the mounting plate onto the ceiling or Use inch screws to fix the camera on the bracket, fix the limit screw according to cement roof with 3 screws which should actual requirement, and make sure the be prepared by you. camera is tightly fixed onto the bracket before your hands leave the camera. -
Page 21: Pendant Mount Installation
Pendant Mount Installation Use 2 screws to fix the upper pole and lower pole. The length is adjustable ranging from 350mm~600mm. According to diameter and position of the 4 holes on the pole (as shown below), drill 3 holes on the ceiling or cement roof. Use screws to fix camera on the lower pole. -
Page 22: Menu Settings
MENU SETTINGS Menu Configuration <VIDEO> APERTURE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 2DNR LEVEL OFF，LOW，MID，MAX 3DNR LEVEL OFF，LOW，MID，MAX WIDE DYNAMIC ON, AUTO， OFF... - Page 23 <EXPOSURE> MODE FULL AUTO SLOW ON, OFF SHT.LIMIT MANUAL GAIN -3, 0, +2, +4, +6, +8, +10, +12, +14, +16, +18, +20, +22, +24, +26, +28 1/1, 1/2, 1/3, 1/6, 1/12, SPEED 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6000, 1/10000...
- Page 24 <WHITE BALANCE> MODE AUTO ONE PUSH INDOOR OUTDOOR MANUAL R.GAIN 0~255 B.GAIN 0~255 <PAN TILT ZOOM> PAN/TILT SPEED 1, 2, 3, 4, 5, 6, 7, 8 PAN/TILT LIMIT ON, OFF -30°~+90° DOWN -30°~+90° LEFT -170°~+170° RIGHT -170°~+170° D-ZOOM LIMIT X1, X2, X3, X4, X5, X6, X7, X8, X9, X10, X11, X12 PTZ TRIG AF ON, OFF...
- Page 25 <SYSTEM> ADDRESS PROTOCOL VISCA BAUDRATE 2400 VEDEO FORMAT 720P50 DVI-I OUTPUT YPBPR MOUNT MODE STAND SOFTWARE VER V1.0.0 DISPLAY INFO ON, OFF <RESTORE DEFAULTS>...
-
Page 26: Menu Explanation
Submenus Menu Explanation From main menu, navigate to select Main Menu <EXPOSURE> menu, press OK to enter. Press MENU button to enter / exit menu. ❶ ❸ <EXPOSURE> MODE MANUAL ❶ <MENU> GAIN ❷ VIDEO SPEED EXPOSURE IRIS WHITE BALANCE EX-COMP ❷... -
Page 27: Video
VIDEO <EXPOSURE> MODE MANUAL GAIN VIDEO menu is used to change video value. SPEED IRIS <VIDEO> EX-COMP APERTURE LEVEL 2DNR LEVEL 3DNR LEVEL SELECT BACK WIDE DYNAMIC SELECT BACK Available Options: Available Option: MODE: APERTURE:0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, FULL AUTO: Gain, Shutter Speed and Iris 12, 13, 14, 15。... -
Page 28: White Balance
SPEED: 1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, MODE: AUTO, ATW(auto tracking), ONE 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, PUSH, INDOOR, OUTDOOR, MANUAL. 1/425, 1/600, 1/1000, 1/1250, 1/1750, “ONE PUSH”：when in “ONE PUSH 1/2500, 1/3500, 1/6000, 1/10000s. TRIGGER” mode, aim the camera at a pure white object (say a white paper), then press IRIS PRI: Gain and shutter speed value are OK button. -
Page 29: System
RESTORE DEFAULTS UP：-30°~+90°, adjustable every 1°； DOWN：-30°~+90°, adjustable every 1°； < RESTORE DEFAULTS> LEFT：-170°~+170°, adjustable every 1°; PRESS OK CONFIRM LIGHT：-170°~+170°, adjustable every 1°. PRESS BACK CANCEL D-ZOOM LIMIT: X1, X2, X3, X4, X5, X6, X7, X8, X9, X10, X11, X12。 BACK PTZ TRIG AF: Turn ON / OFF the auto focus when the camera pans / tilts / zooms. -
Page 30: Annex 1 Technical Specifications
ANNEX 1 TECHNICAL SPECIFICATIONS Model AMC-S2003 Image Sensor 1/2.8" Exmor CMOS,3.27 megapixel Signal System 1080p/60，1080p/30，1080i/60，720p/60, 720P/30 (HD) 1080p/50，1080p/25，1080i/50，720p/50, 720P/25 Signal System NTSC, PAL (SD ) Focal Lens f=4.7mm-94.0mm Iris F1.6-F3.5 Optical Zoom Digital Zoom Min. object 10mm-1,000mm distance Horizontal Viewing 55.4°-2.9°(1080P mode) - Page 31 Dimensions 226mm×206mm×159mm （W×H×D） Weight 1.7KG Body color White / grey...
-
Page 32: Annex 2 Size And Dimension
ANNEX 2 SIZE AND DIMENSION Front Rear Side Bottom... -
Page 33: Annex 3 Sw1 Definition
ANNEX 3 SW1 DEFINITION DIP No. Address... - Page 34 DIP No. VGA, 5-BNC (HD-SDI or YPbPr output is not supported) Analog Video Format YPbPr DIP No. Ceiling Mounting Type Desktop...
-
Page 35: Troubleshooting
TROUBLESHOOTING Problem Possible Cause Solution Power supply failure Check power supply No action or image Power adapter damaged Replace power adapter after powered on Power cable connection got loosen Check & reconnect Check & reconnect power cable Not enough power supply No self-testing after connection powered on, or with...