Roland SBX-1000 Owner's Manual page 13

21: SPACE-D
This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a
transparent chorus effect.
Knob Parameter
Pre Delay
Rate BPM Sync
[Knob 1] Rate
[Knob 2] Depth
Phase
Wet Low Gain
Wet High Gain
[Knob 3] Balance
Level
22: PHASER
A phase-shifted sound is added to the original sound and modulated.
Knob Parameter
Mode
[Knob 2] Manual
Rate BPM Sync
[Knob 1] Rate
Depth
Polarity
[Knob 3] Resonance
Wet Low Gain
Wet High Gain
Mix
Level
Value Explanation
0.0–100 msec Adjusts the delay time from the direct sound until the chorus sound is heard.
OFF, ON OFF: Rate specified as numerical value
ON: Rate specified as note value
0–127, note Frequency of modulation
0–127 Depth of modulation
0–180 deg Spatial spread of the sound
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
D100:0W–D0:100W Volume balance between the direct sound (D) and the chorus sound (W)
0–127 Output Level
Value Explanation
4-STAGE, 8-STAGE, Number of stages in the phaser
12-STAGE
0–127 Adjusts the basic frequency from which the sound will be modulated.
OFF, ON OFF: Rate specified as numerical value
ON: Rate specified as note value
0–127, note Frequency of modulation
0–127 Depth of modulation
INVERSE, SYNCHRO Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite. When using a mono source,
this spreads the sound.
SYNCHRO: The left and right phase will be the same. Select this when inputting a
stereo source.
0–127 Amount of feedback
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
0–127 Level of the phase-shifted sound
0–127 Output Level
13