Set Up - 2GOability Boost User Manual

Getting on your scooter:
Position the seat for safe and easy mounting;

Return tiller to full upright position;

Carefully place one foot on the approximate center of the deck and seat yourself

comfortably and securely on the seat;
Fasten the seatbelt, if your scooter is so equipped;

Flip down or replace the armrests.

Getting off your scooter:
Make certain that the power is turned off and the key is removed;

Return tiller to full upright position;

Flip up or remove the armrests;

Unfasten the seatbelt;

Carefully place one foot on the ground, transfer your weight to that leg, and

slowly come to a standing position;
Step away from the scooter.


4.3 Set up

 Tip
For your first driving session, make certain that your scooter starts out on a level
surface and that you will continue driving on a level surface.
To get on your scooter:
Stand behind your scooter;

Place the scooter in Drive, see picture 1;

Make certain that the seat is positioned for safe and easy use;

Position yourself in the seat;

Use the seat rotate lever to position the seat so that it is locked in the fully

forward direction;
Fasten your seat belt, if your scooter is so equipped;

Place the key into the key switch;

Rotate the key to the on position.

10