Front And Rear Views - Russound TCH1 Installation Manual

RNET- LED indicates active RNET connection with
Antenna - Screw to the ANT jack
for WiFi communication to the
home network router
AIR - LED indicates successful wireless connection. When
the RNET Controller flashing, unit is actively sending or receiving data wirelessly.
TCHS1 front view
EZ Setup - Will restore the
unit's IP address back to factory
default
TCHS1 rear view (with antenna attached)
Russound TCH1 Installation Manual
LAN 1, 2, 3, 4 - LEDs indicate connection and
WAN - Not used
activity of corresponding back panel ports
LAN 1, 2, 3, 4 - 10/100 Ethernet switches. RJ45
connectivity to home network over CAT-5 cable
WAN - Not used
USB - Use supplied adapter to connect
to the controller's RS232 serial port

FRONT ANd REAR VIEWS

DC - Connect interface power
supply and plug into 120VAC
outlet
5