3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button.
1)
Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.
2)
Enter wireless station A/B in the Description field.
3)
Select Enabled in the Status drop-down list.
4)
Click the Save button.
5)
Click the Back button.
The filtering rules that configured should be similar to the following list:
4.6.4 Wireless Advanced
Choose menu "Wireless → Wireless Advanced", you can configure the advanced settings of
your wireless network.
Transmit Power - Here you can specify the transmit power of Router. You can select High,
Middle or Low which you would like. High is the default setting and is recommended.
Figure 4-23 Wireless Advanced
- 46 -
WR3000N
300M Wireless N Router