Binatone WR3000N User Manual page 18

1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-7.
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact your
ISP.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-9. Then you can go on with the wireless configuration.
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-8.
IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
Figure 3-7 Quick Setup - PPPoE
Figure 3-8 Quick Setup - Static IP
- 12 -
WR3000N 300M Wireless N Router