Binatone WR3000N User Manual page 27

Method Three:
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
Step 2: Choose "Press the button of the new device in two minutes" and click Connect.
Step 3: For the configuration of the wireless adapter, please choose "Push the button on my
access point" in the configuration utility of the WPS as below, and click Next.
The WPS Configuration Screen of Wireless Adapter
Figure 4-3 Add A New Device
WR3000N
- 21 -
300M Wireless N Router