Day Night Box Camera· User Manual
3.1.16 Defective Pixel Correct Setting
Exit the main menu and in the live view interface, set the menu
button to left for about 2 seconds to enable auto DPC function.
Note:
This function is more active in the absolutely dark
environment. Make sure that the IRIS of lens is closed before using
this function.
3.1.17 RS-485 Setting
There is no menu item for setting the RS-485 parameters. If you
need to configure the menu items remotely, you have to set the
RS-485 parameters of control device the same as those of camera.
The default RS-485 parameters of camera are as follows:
Parameter
Baudrate
Address
Protocol
Note:
Only the models w ith suffix '-A' support RS-485 functions.
3.1.18 Save All/Exit
Move the cursor to the Exit, and press the menu button to exit the
settings without saving.
Table 3-2 Default RS-485 Parameters
Default value
4800
001
PELCO-D.
60