Basic Settings; Operation; Making A Call; Pre Dialing A Call - NexxTech CALLER ID User Manual

Wall Mounting

Basic Settings

1. After installing the batteries, the display should flash the word
"ENGLISH". If not, press and hold
4 seconds.
2. Select the desired language using
button to confirm.
3. Select the desired contrast setting (2=Default) using
Press DELETE button to confirm.
4. Set the hour (00-12) using
to confirm.
5. Repeat to set minute, month and day.
6. Set the TONE/PULSE using
to confirm.
If you wish to change the language, contrast, time settings at a later
date, press and hold button for approximately 4 seconds and repeat
steps 2-6 above.
button for approximately
or buttons. Press DELETE
or
or buttons. Press DELETE button
or buttons. Press DELETE button

Operation

When the telephone is not in use, the date and time, number of new and
total number of calls stored in the Caller ID memory will be shown on the
display. The display will show the caller number (and name if available).

Making A Call

1. Pick up the handset or press
buttons.
for a dial tone.
2. Dial the number you wish to call. The display will show the number
that you are dialing. If you dial a number over 14 digits long, it will
show the last 14 digits only.
3. When you have completed your call, hang up the handset or press
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation by
pressing the
accordingly.

Pre Dialing A Call

1. Dial the number you wish to call. To correct a number press DELETE
button for each incorrect digit.
2. Pick up the handset or press

Receiving A Call

When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the caller telephone number
(when caller ID service is activated). This feature allows you to decide to
pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press
2. At the end of the call, return the handset to the cradle or press
button again.
5
button (the LED will light) and wait
button and picking up or hanging up the handset
button or CALL BACK button.
button to answer the call.