Table of Contents
Advertisement
pressing the number buttons. For example: press 10+ button once, 5 button once, you may
select the 15th band. Press the CH- or CH+ button, the band will be switched up or down.
3) Automatically search bands: press the AUTO button, this unit will start to search bands from the
lowest part to highest part automatically. Meanwhile the searched bands will be saved orderly.
Press STOP button to stop searching.
3. Soundtrack Selection
Press the MO/ST button on the remote control, you may select Mono and Stereo soundtrack output
in FM status. If the signal is not strong enough, you cannot select Stereo.
4. Exit FM Status
Press the CD/FM button on the remote control (or front panel) to exit FM status, and press
CD/USB switch to other modes.
Remark: FM Frequency range: 87.5-108 MHz
NOTE: 1. You may adjust the best radio effect by adjusting the antenna.
2. You can search further bands by pressing AUTO button when adjusted the antenna in a right
position.
3. If the band is not clear by auto search, you choose the way manual search adjustment by
press SEEK-/SEEK+ button.
4. The channel number could not exceed 20
5. Cannot input the frequency number directly.
SPECIFICATION
Output ports
Input ports
Power supply
Max power
Frequency
L/R speaker output ports
USB In, Headphone Jack
220-240V~ 50Hz
40W
20Hz-20KHz ±3dB
12
Advertisement
Table of Contents
