SchaubLorenz MCCD-29469 User Manual

Cd mp3 microsystem with usb

Advertisement

Quick Links

MCCD-29469
CD MP3 MICROSYSTEM
WITH USB
USER MANUAL
Please read and keep these instructions

Advertisement

Table of Contents
loading

Summary of Contents for SchaubLorenz MCCD-29469

  • Page 1 MCCD-29469 CD MP3 MICROSYSTEM WITH USB USER MANUAL Please read and keep these instructions...
  • Page 2 Important safety instructions – please read carefully and keep for future reference To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product.
  • Page 3 Electric supply Please unplug the product in case of prolonged non-use. This product is intended to be used under temperate climate and should not be used under tropical climate. If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid any danger.
  • Page 4: List Of Main Parts

    INTRODUCTION Thank you for choosing this Schaub Lorenz product. Here are the main characteristics of your new microsystem: ‐ Equipped with a digital PLL tuner, you can easily search and memorize FM radios, ‐ With its compact with elegant design, this Hi-Fi system can easily find its place at home and be installed in just a couple of minutes, ‐...
  • Page 5: Location Of Controls

    LOCATION OF CONTROLS 1、POWER ON/OFF 9、EQ 2、REMOTE CONTROL SENSOR 10、CD/FM 3、PLAY 11、CD/USB 4、PAUSE 12、RIPPING 5、STOP 13、DISPLAY 6、PREV 14、HEADPHONE 7、NEXT 15、VOL ADJUST 8、USB 16、Amplifier Output 17、FM antenna...
  • Page 6 18、OPEN/CLOSE 1. RIPPING 2. Number key 3. Mute 4. Random 5. Back/Forward 6. CD/FM 7. BASS 8. AUTO 9. TREBLE 10. EQ 11. Program 12. Repeat 13. CH+/- 14. SEEK+/- 15. Next / Prev 16. CD/USB 17. Vol+/- 18. Save 19.
  • Page 7 INSTALL THE REMOTE CONTROL BATTERY 1. Remove the battery door. 2. Install 2pc ``AAA`` battery into the battery bracket (batteries not provided). Make sure that the + symbol is respected 3. Close the battery door. Note: 1. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
  • Page 8: Volume Adjustment

    song is needed, press the 1 and 6 buttons. VOLUME ADJUSTMENT Press the VOL-/+ buttons on the remote control to turn up or down the volume of this unit. You can also turn the VOLUME KNOB on the front panel to control volume. CD RIPPING While playing the CD disc, press RIPPING button, “REC”...
  • Page 9: Fast Rewind / Fast Forward

    Audio CD Compatibility The CD-RIPPING function is only compatible with Audio CD. Other disc types such as CD-R/-RW, CD MP3, DVD and Audio DVD are not supported. Besides, the discs in CD-G and DTS-CD formats, or Audio CD with special protections may not be supported. Respect for Copyright The CD-RIPPING function must be used legally.
  • Page 10 4. Press PLAY/PAUSE to start playing. To cancel program play, Press STOP . Note: when you operate this function, please make sure the mode is STOP. Otherwise you would just find the selections to set the play mode RANDOM While playing the CD disc, press the RANDOM button to play the disc in random. AUTO While in radio mode, press the AUTO button to search the bands automatically.
  • Page 11: Playing Usb

    PLAYING USB Press the “CD/USB” button to switch to CD / USB playback. NOTE: If in FM mode ,please press CD/FM first to switch to CD mode before switch to USB. Connecting a USB device 1) Insert a USB key inside the connector. 2) Press the CD / USB key to start.
  • Page 12: Specification

    pressing the number buttons. For example: press 10+ button once, 5 button once, you may select the 15th band. Press the CH- or CH+ button, the band will be switched up or down. 3) Automatically search bands: press the AUTO button, this unit will start to search bands from the lowest part to highest part automatically.
  • Page 13: Troubleshooting

    TROUBLE SHOOTING Please use the following methods to solve the following problems while using this unit. Fault Phenomenon Possible Cause Handing Power supply cannot be Power plug is not fully inserted into Insert the power plug into turned on the socket the socket securely Replace with...

Table of Contents