Safety Features; Pit Stop And Turbo Timer Modes - Automate 4214A Owner's Manual

Note Some Push-to-start vehicles do not offer the key takeover
function, instead the vehicle shuts down when the vehicle
door is opened and the car needs to be started as normal.

Safety Features

The following safety features will disable the remote start when acti-
vated or not allow the engine to start if not properly set before starting.
• Foot Brake is depressed
• Hood is open
• Shut down toggle switch is OFF
• Engine over-rev protection (Tachometer mode only)
• MTS mode is not enabled correctly

Pit Stop and Turbo Timer Modes

This remote start can keep the engine running during short trips away
from the vehicle or to cool down turbo timers.
Enabling Pit Stop mode:
1. Park in a well ventilated area.
2. With the engine running set the parking brake and release the
foot brake.
3. Press and release the remote control button, the parking lights turn
on as confirmation.
4. Turn off the ignition and remove the key, the engine continues
running.
5. Exit the vehicle, the engine runs for the programmed runtime.
Enabling Turbo Timer mode *:
Follow the same procedure above, however, in step 3, instead of press-
ing the remote control button, press and release the dash mounted
© 2012 Directed. All rights reserved.
7