Adjusting The Volume Level; Playing Back Via Bluetooth - Eton Rugged rukus Owner's Manual

2. Press the button to start charging for your device.
Press the button again to stop charging.
NOTE: Use the USB power cord that came with your device to
connect to the unit. The USB light turns on indicating
charging out to USB device

ADJUSTING THE VOLUME LEVEL

Press the and buttons to adjust the volume levels.

PLAYING BACK VIA BLUETOOTH

1. Press and hold for 3 seconds ON/OFF
unit. A single blue Battery Life LED light will turn on to indicate
the unit is on.
2. Press the Bluetooth button to switch the sound source to
Bluetooth mode.
6
button to turn on the
3. Hold the button for 3 seconds to place the unit in pairing
mode. The indicator starts blinking rapidly. Unit will give off
two short beeps.
NOTE: The unit beeps once more after the unit is
successfully connected.
4. Open the Bluetooth settings menu on your Bluetooth-
enabled mobile device or computer and connect it to the
Rugged Rukus.
5. Once Bluetooth is connected, seclect the music and press
the button on your device. The unit will playback music
automatically.
NOTE: Playback time on built-in battery is ~8 hours,
depending on music level and other factors.