Sony SLT-A33 Service Manual page 26

Assembly-1: Method of attachment of
LCD-021 Flexible Board
1-1. Fold dotted line parts of the LCD-021 Flexible Board as
shown in figure.
Valley fold
Adhesive tape
Mountain fold
1-2. Peel off the released paper of double-coated adhesive tape
on the B side, and then attach it to the A side without covering
the boss hole. (3 places)
Peel off the released paper of double-coated adhesive tape
on the C side, and then attach it to the A side without covering
the boss hole. (3 places)
A
A
A
B
C
B
C
B
C
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
1-3. Peel off the released paper of double-coated adhesive tape,
and then fold dotted line parts of the LCD-021 Flexible Board
as shown in figure.
Adhesive tape
Adhesive tape
Adhesive tape
3. ASSEMBLY
1-4. Attach the CV LCD Hinge Cover (C) to the CV LCD Hinge Assy,
and then attach the LCD-021 Flexible Board as shown in figure.
CV LCD Hinge Assy
CV LCD Hinge Cover (C)
1-5. 1�Attach the CV LCD Hinge Cover (M), and then rotate
the CV LCD Hinge Assy by 90°.
2�Tighten one "#2: M1.7 X 4.0" screw.
3�Rotate the CV LCD Hinge Assy by
the original position.
CV LCD Hinge Cover (M)
1-6. Attach the LCD-021 Flexible Board as shown in figure.
3-1
1-7. 1�Connect the LCD-021 Flexible Board to the connector of
the PD-414 Complete Board, and attach it to the boss hole.
2�Attach the EM PD Ground Plate and tighten one
"#11: M1.7 X 4.0 (Tapping)" screw.
1-8. 1�Attach the CV P Cabinet (C), and then rotate
the CV LCD Hinge Assy by
2�Tighten the two "#2: M1.7 X 4.0" screws.
90° to return it to
CV P Cabinet (C)
1-9. Wrap the LCD-021 Flexible Board around the CV LCD
Hinge Assy by rotating it one circle as shown in figure.
PD-414 Complete Board
EM PD Ground Plate
90° as shown in figure.