Automatic Switch To Park Mode Recording - Hyundai softman DVD R700 User Manual

6. Basic operation
C. Automatic switch to parking mode recording
► In case of parking mode set in auto, the device automatically switches to parking
mode recording when the car is turned off. If motion is detected within view angle of
lens, the device starts recording.
► When the car is turned on, the device automatically switches to normal recording.
► In case of no motion detected in parking mode recording, LED1 is on in blue color and
LED2 is off.
► In case of motion detected, LED1 is on in blue color, LED2 turns to red color until the
recording is finished.
NOTE
❖ To set up parking mode to auto or manual, the configuration is necessary by PC Viewer. Default is manual.
❖ In parking mode set in auto, you can choose [Voltage Sensing] and [Vibration Sensing]. Default is [Voltage Sensing] in auto mode.
❖ When using the device for the first time after setting up [Voltage Sensing] in parking mode, the device needs to check the car turned
HOT
on and off. In case of [Vibration Sensing], checkup is not necessary.
POINT
❖ In case of [Voltage Sensing], turn on the car and press "
Now [Voltage Sensing] in parking mode is activated.
Normal recording mode and [Voltage Sensing] of parking mode are automatically switched by the voltage measurement.
NOTE
To use [Voltage Sensing] of parking mode, the following are required.
❖ To use the function of parking mode recording, the device should be directly connected with the power supply of car. Ask for auto-mechanic,
regarding the direct connection.
". Afterward, turn off the car and press "
Motion detection recording
(no motion detected)
Motion detection recording
(motion detected)
" to finish the setup.
21
R700