Table of Contents
Advertisement
ENGLISH
16
Measuring and programming water hardness
Water hardness measuring is very important in order to defi ne the desca-
ling frequency and to install the "INTENZA+" water fi lter (for more detail on
the water fi lter, see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one measurement.
2
Wait for one minute.
3
Check how many squares have changed the colour to red and then
consult the table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
"INTENZA+" water fi lter. (see next chapter for this).
4
Now you can program the water hardness setting.
Press the "
" button and scroll the pages by pressing the "
button until the following icon is displayed.
Note:
The machine is supplied with standard water hardness setting, suitable for
most of the type of water.
5
Press the "
" button to increase the value or the "
decrease the value.
6
Press the "
" button to confi rm the setting.
"
" button to
Advertisement
Table of Contents
