Table of Contents
Advertisement
ENGLISH
16
Measuring and Programming Water Hardness
Water hardness measuring is very important in order to defi ne the descal-
ing frequency and to install the "INTENZA+" water fi lter (for more detail on
the water fi lter, see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2
Wait for one minute.
3
Check how many squares have changed the colour to red and then
refer to the table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
"INTENZA+" water fi lter (see next chapter).
4
Now you can program the water hardness setting. Press the "
button and scroll the pages by pressing the "
lowing icon is displayed.
Note:
The machine is supplied with a standard water hardness setting, suitable
for most types of water.
"
" button until the fol-
Advertisement
Table of Contents
