Advertisement
Connecting Wires to Terminals
Connector A
8
6
4
2
Ground wire (Black)
7
5
3
1
8
6
4
2
7
5
3
1
Connector B
Connect to the vehicle's parking brake detection
switch harness.
Connect to vehicle's reverse lamp harness when
Connect to the terminal that is grounded when either
To connect the Kenwood navigation system,
consult your navigation manual.
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
4
|
KVT-526DVD/KVT-556DVD
Battery wire (Yellow)
Ignition wire (Red)
PRK SW
For the sake of safety, be sure to connect the parking sensor.
using the optional rear view camera.
To steering remote
the telephone rings or during conversation.
If no connections are made, do not let the cable come out from the tab.
USB device
(commercially available)
Parking sensor wire (Light Green)
Reverse sensor wire (Purple/White)
Steering remote control input (Light Blue/Yellow)
To use the steering wheel remote control feature, you need to an
exclusive remote adapter (not supplied) matches your car is required.
When this terminal is not in use, leave its cap on.
Mute wire (Brown)
Power control/ Motor antenna control wire
(Blue/White)
USB connector
FUSE ( 15A )
Advertisement
