Troubleshooting - Indesit IWDC 6125  Instructions For Use Manual

Troubleshooting

see “Assistance”
GB
Problem: Possible causes / Solutions:
The Washer-dryer does not
switch on.
The wash cycle does not start.
.
The Washer-dryer does not take
in water (the indicator light for
the first wash cycle stage
flashes rapidly).
The Washer-dryer continuously
takes in and see “Installation”)
drains water. see “Installation”)
The Washer-dryer does not drain
or spin.
see “Installation”)
The Washer-dryer vibrates a lot see “Installation”)
during the spin cycle. see “Installation”)
see “Installation”)
The Washer-dryer leaks. see “Installation”)
see “Care
and maintenance”)
see “Installation” .
The "option" indicator lights and
the "start/pause" indicator light
flash, while one of the "phase in
progress" indicator lights and
the "door locked" indicator light
will remain lit in a fixed manner.
There is too much foam.
The washer-dryer does not dry.
0
13