Switching The Powerbrush On And Off; How To Use The Powerbrush - Miele S 7000 series Operating Instructions Manual

Switching the PowerBrush on
and off
The roller on the PowerBrush is driven
by a motor which can be switched on
and off.
^ Press the Carpet button on the
handle.
The PowerBrush will switch on. The
PowerBrush in-operation indicator light
in the control unit will light up yellow.
This button enables you to switch the
PowerBrush off during vacuuming and
the vacuum cleaner will continue to
operate using suction only. This is
useful when moving from vacuuming a
fitted carpet to a rug, for example.
The PowerBrush will switch itself off
automatically as soon as the cleaner
is raised to its upright position.

How to use the PowerBrush

^ To achieve the best results, pass the
PowerBrush slowly backwards and
forwards over the carpet or floor
covering.
For rugs and carpets with fringes,
always draw the PowerBrush from the
middle of the rug or carpet across the
fringe towards the floor.
Using the PowerBrush
19